Specifications

Chapter 4 - Installation for MV-8 and MV-19 Controllers
44 Adept MV Controller User’s Guide, Rev C
4.1 Shipping, Storage, Unpacking and Inspection
Shipping and Storage
This equipment must be shipped and stored in a temperature controlled environment,
within the range -25°C to +55°C. The recommended humidity range is 5 to 90%,
non-condensing. It should be shipped and stored in the Adept-supplied packaging, which
is designed to prevent damage from normal shock and vibration. You should protect the
package from excessive shock and vibration.
Before Unpacking
Carefully inspect all shipping crates for evidence of damage during transit. Pay special
attention to tilt and shock indication labels on the exteriors of the containers. If any
damage is indicated, request that the carrier’s agent be present at the time the container is
unpacked.
Upon Unpacking
Compare the actual items received (not just the packing slip) with your equipment
purchase order and verify that all items are present and that the shipment is correct.
Inspect each item for external damage as it is removed from its container. If any damage is
evident, contact Adept at the numbers listed in Chapter 1.
Retain all containers and packaging materials. These items may become necessary to settle
claims or, at a later date, to relocate equipment.
Repacking For Relocation
If the controller needs to be relocated, reverse the steps in the installation procedures that
follow this section. Re-use all original packing containers and materials and follow all
safety notes used for installation. Improper packaging for shipment will void your
warranty.
4.2 Controller ID Label
The identification (ID) label is located on the left side of the controller chassis. On it you
will find the model and serial numbers and the voltage and current ratings. A smaller
serial number label is also located on the front of the chassis above the On/Off switch. You
should always have this serial number available when you call Adept Customer Service
for technical support.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com