Specifications

Chapter 3 - Installation for MV-5 and MV-10 Controllers
38 Adept MV Controller User’s Guide, Rev C
Panel Mounting
To panel mount the Adept MV-5 or MV-10 Stand-Alone controller, you must use the
mounting brackets and screws from the accessories kit. See Figure 3-9 for instructions.
Figure 3-9. Panel Mounting for MV-5/MV-10 Stand-Alone Controller
Front
Side View of MV-5 or MV-10
To install mounting brackets in panel mount
position:
• Place bracket in position.
• Secure bracket with 3 screws and washers
from accessories kit at locations shown
in drawing.
• Repeat process for other side of controller.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com