Specifications

Chapter 3 - Installation for MV-5 and MV-10 Controllers
34 Adept MV Controller User’s Guide, Rev C
3.8 Installing the A-Series Monitor and Keyboard
NOTE:
The peripheral equipment such as the keyboard and monitor
supplied by Adept are intended for use in light industrial conditions. In
more severe conditions, they should be protected with a suitable
enclosure.
Installation Procedure
An A-Series Adept MV controller can be configured with a color monitor and an extended
keyboard with built-in trackball. Both of these devices connect to the VGB module. See the
V
+
Operating System User’s Guide for details on using the keyboard and trackball.
See Figure 3-7 for details; the steps are listed below.
1. Make sure the controller is turned off before making any connections.
2. Verify the voltage range marked on the monitor is compatible with your local
voltage source. Connect the color monitor AC power cord to the monitor, then
plug it into an appropriate voltage source.
Figure 3-7. Connecting the A-Series Monitor and Keyboard
P
O
I
N
T
E
R
1
2
3
4
ON
2
3
41
V
I
D
E
O
B
U
S
M
O
N
I
T
O
R
KEYBOARD
OK
VGB
A-Series Color Monitor
A-Series Keyboard/Trackball
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com