Specifications

Chapter 3 - Installation for MV-5 and MV-10 Controllers
32 Adept MV Controller User’s Guide, Rev C
Figure 3-5. Adept MV-5 Upper Backplane (P1) Jumper Plugs
Figure 3-6. Adept MV-10 Upper Backplane (P1) Jumper Plugs
P1 Backplane
Edge Connectors
for Adept MV-5
Slot
4
Slot
5
No jumpers
required
for slot 5
Slot
1
Slot
2
Slot
3
Jumper
location
for slot 2
Jumper
location
for slot 4
Jumper
location
for slot 3
In a typical MV-5 system, jumper plugs are
factory-installed at slot 3.
P1 Backplane
Edge Connectors
for Adept MV-10
Slot
4
Slot
5
Slot
6
Slot
7
Slot
8
Slot
9
Slot
10
No jumpers
required
for slot 10
Slot
1
Slot
2
Slot
3
Jumper
location
for slot 2
Jumper
location
for slot 5
Jumper
location
for slot 4
Jumper
location
for slot 3
Jumper
location
for slot 6
Jumper
location
for slot 7
Jumper
location
for slot 8
Jumper
location
for slot 9
In a typical MV-10 system, jumper plugs are
factory-installed at slot 3.
In an MV-10 system with an AdeptNet board installed in slot 2,
jumpers must be installed in slot 2 and slot 4.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com