Specifications

Appendix C - Additional Standards Compliance Information
178 Adept MV Controller User’s Guide, Rev C
Color-Code used by Adept for Service-Indicators
These additional indicators are intended to assist skilled service personnel only. They
consist of small LED’s, typically located on the front of the VME modules. They are used
to indicate equipment status to facilitate maintenance and testing. They do not require
action by the operator, and when the controller is installed as recommended, the service
indicators are not normally visible to the operator.
See the relevant chapters earlier in this manual for a brief description of each LED, or
contact Adept Customer Service for additional information.
Table C-4. Service Indicator Color-Code
Indicator Lights
Red
Meaning Non-operating condition (fault or not ready).
Yellow
Meaning Operating condition requiring caution.
Green
Meaning Normal operation
Illuminated Actuators
There are no illuminated actuators intended specifically for service use.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com