Specifications

Chapter 10 - AdeptMotion Interface Module (MI6/MI3)
128 Adept MV Controller User’s Guide, Rev C
10.5 Connecting to User Equipment
The MI3/MI6 module connections to user equipment are divided into three groups: the
encoder, the machine, and the servo. Adept offers a set of cables and Motion Interface
mounting panels (MP6) that should be used to make connections between the MI3/MI6
module and your equipment. Each connector on the MI3/MI6 has a corresponding cable
and MP6 mounting panel. The MP6 panels can be installed on standard DIN mounting
rails.
See the AdeptMotion VME Developer’s Guide for complete information on the installation
and setup of user equipment.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com