Specifications

Camera Cable Pin and Signal Information
Adept MV Controller User’s Guide, Rev C 121
Str/Pwr 2 CAM4 1 Power return
Str/Pwr 1 CAM4 2 +12V power
VIS 30 CAM4 3 Shield(video)
VIS 15 CAM4 4 Video
VIS 17 CAM4 5 Shield(Hd)
VIS 16 CAM4 6 Hd (horizontal drive)
VIS 31 CAM4 7 Vd (vertical drive)
-- -- CAM4 8 not connected
-- -- CAM4 9 not connected
-- -- CAM4 10 not connected
-- -- CAM4 11 not connected
VIS 17CAM4 12Shield(Vd)
-- -- Str/Pwr 1 User +12 V to cameras
-- -- Str/Pwr 2 User power return
VIS 26 Str/Pwr 3 Strobe 1
VIS 11 Str/Pwr 4 Strobe return
VIS 39 Str/Pwr 5 Strobe 2
VIS 11 Str/Pwr 6 Reserved
VIS 40 Str/Pwr 7 Reserved
VIS 11 Str/Pwr 8 Reserved
VIS -- Str/Pwr 9 Shield (chassis ground)
Note that this cable provides user-supplied 12V dc to the cameras via the
Strobe and Power connector, not from the Adept controller.
Table 9-7. Four-Camera Breakout Cable Pin Assignments (sorted by destination)
From: Pin To: Pin Function
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com