Specifications

Camera Cable Pin and Signal Information
Adept MV Controller User’s Guide, Rev C 119
Table 9-6. Two-Camera Breakout Cable Pin Assignments
From: Pin To: Pin Function
VIS 8 CAM1 1 Power return
VIS 7 CAM1 2 +12V power
VIS 12 CAM1 3 Shield(video)
VIS 42 CAM1 4 Video
VIS 38 CAM1 5 Shield(Hd)
VIS 36 CAM1 6 Hd (horizontal drive)
VIS 37 CAM1 7 Vd (vertical drive)
VIS 38 CAM1 8 Shield(Clock)
VIS 22 CAM1 9 Clock
-- -- CAM1 10 not connected
-- -- CAM1 11 not connected
VIS 38CAM1 12Shield(Vd)
VIS 6 CAM2 1 Power return
VIS 5 CAM2 2 +12V power
VIS 43 CAM2 3 Shield(video)
VIS 29 CAM2 4 Video
VIS 35 CAM2 5 Shield(Hd)
VIS 34 CAM2 6 Hd (horizontal drive)
VIS 19 CAM2 7 Vd (vertical drive)
VIS 35 CAM2 8 Shield(Clock)
VIS 20 CAM2 9 Clock
-- -- CAM2 10 not connected
-- -- CAM2 11 not connected
VIS 35CAM2 12Shield(Vd)
Note that the Clock output to cameras 1 and 2 may be enabled by a
switch on the VIS board, if required.
Also note that this cable provides 12V dc (fused 1A max) to the
cameras from the Adept controller. The fuse is not user-replaceable.
If
the total current required by the two cameras exceeds 1A, this cable
should not be used.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com