Specifications

Chapter 9 - AdeptVision VME Module (VIS)
118 Adept MV Controller User’s Guide, Rev C
Figure 9-6. Pin Locations for Camera Cable Connector (12-Pin Hirose Male)
Table 9-5. Adept 10-Meter Camera Cable Pin Assignments
Pin # at
controller
end (male) Function Notes
Wire Color
(typical)
Pin # at
camera end,
(female)
1 Power return gray 1
2 +12V power to camera yellow 2
3 Shield (video) red-shield 3
4 Video from camera red-signal 4
5 Shield(Hd) orange-shield 5
6 Hd (horizontal drive) to camera orange-signal 6
7 Vd (vertical drive) to camera black -signal 7
8 Shield (Clock) to camera (cam. 1 & 2 only) white-shield 8
9 Pixel clock to camera (cam. 1 & 2 only) white-signal 9
10 used reserved brown 10
11 used reserved blue 11
12 Shield (Vd) black-shield 12
• Connector at controller end: 12-Pin Hirose Male, HR10A-10P-12P, with ground terminal lug (shield).
• Connector at camera end: 12-Pin Hirose Female, HR10A-10P-12S.
• Cable specifications: 12 conductors - including 4 coax pairs, 4 discrete conductors, and overall shield.
At each end the shield is clamped to connector body.
9
10
12
11
8
7
6
5
4
3
2
1
Black
Brown
Gray
Blue
Yellow
White
Orange
Red
Overall
Braided Shield
(Wire colors
may vary.)
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com