Specifications

VMEbus Address
Adept MV Controller User’s Guide, Rev C 105
DIP Switch Settings
8.3 VMEbus Address
The VGB module has a fixed address and should not be modified by the customer.
Table 8-1. VGB Module Front Panel DIP Switch Functions
Switch Function
1 OFF – enables Adept logo display at bootup
ON – disables logo display
2 OFF – the pointer is a mouse (Microsoft serial mouse protocol, 1200 bps)
ON – the pointer is a touchscreen (ELO TouchSystems protocol, 1200 bps)
3 OFF – U.S. keyboard
ON – Japanese keyboard
4 Adept internal use only, should be set to OFF
If you change the settings, you must reboot (turn controller off, then on) before the changes take
effect.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com