User guide

Symphony/Symphony-i Setup (cont'd)
68
SCREEN ACTION
11. If touch screen calibration was successful,
“
CALIBRATION SUCCESSFUL
” is displayed
momentarily. You are then returned
automatically to the "
Diagnostics
" screen.
If touch screen calibration was not successful,
“
Calibration Unsuccessful
” is displayed
momentarily. You are then returned
automatically to the first
Touch Screen
Calibration
screen. If this happens, press the
center of the square on the first screen and
repeat the process.
NOTE:
You will progress through the
Touch
Screen Calibration
screens regardless of
where you touch. To successfully calibrate the
touch screen you must press the center of the
box on each screen.
If no touch is made within 5 seconds, “
No
Touch Detected.. Try Again
.” is displayed in
the center of the
Touch Screen Calibration
screen.