User guide

Security System Operation (Cont'd)
25
To check the status of other partitions perform the following:
SCREEN ACTION
1. From the "Home" screen press the
SECURITY
button to display the "Arming"
screen.
2. Press the "Current Partition" tab (lower edge
of the screen; in this case it displays
P1
). The
"User Authorization" screen is displayed with
the instructions “
For Authorized Partitions,
Enter Code
”.
3. Enter the code authorized to access other
partition(s).
If the code is accepted, the system displays
the partitions that user has access to.
NOTE:
A code may have access to some (but
not all) of the available partitions.
This screen displays the available partitions (in
this case, Partitions 1 and 2), and their current
status.
The current partition is shown at the top of the
display (in this example, the device is attached
to Partition 1 (
P1
)). To change this
assignment, select the appropriate button (e.g.
press
P2
to switch control to Partition 2).