User guide

Security System Operation (Cont'd)
23
How to Disarm the System
IMPORTANT:
If you return and the main burglary sounder is on, DO NOT enter
the premises, but call the police from a nearby safe location. If you return after an
alarm has occurred and the main sounder has shut itself off, Symphony/Symphony-i
will beep rapidly upon entering, indicating that an alarm has occurred during your
absence.
LEAVE IMMEDIATELY and CONTACT THE POLICE
from a nearby
safe location.
Disarm the system as follows:
SCREEN ACTION
1. Press the
DISARM
button on any "Armed"
screen. The "User Authorization" screen is
displayed with the instructions “
To Disarm,
Enter Code
”.
2. Enter your 4-digit user code. The system
will disarm. If you have access to multiple
partitions, the
Partition No. & Description
screen is displayed.
3. Press the
DISARM ALL
button if you wish
to disarm the system. Symphony/Symphony-i
beeps once and the "Arming" screen is
displayed showing the system as
Ready to
Arm
or not ready if any zone is faulted (open).
NOTE:
If you wish to disarm only selected
partitions, you must first highlight the
partition(s) to be disarmed, then press the
DISARM SELECTED
button.
Symphony/Symphony-i beeps once and the
"Arming" screen is displayed showing the
system as
Ready to Arm
or not ready if any
zone is faulted (open).