Setup guide

System Communication and Operation
6-7
SUMMARY OF ARMING MODES
Features for Each Arming Mode
Arming Mode
Exit Delay Entry Delay Perimeter Armed Interior Armed
AWAY Yes Yes Yes Yes
STAY Yes Yes Yes No
NIGHT-STAY Yes Yes Yes
only those zones
listed in Night-Stay
zone list
INSTANT Yes No Yes No
MAXIMUM Yes No Yes Yes
Keypad Functions
The following is a brief list of system commands. For detailed information concerning system functions,
refer to the User's Manual.
Keypad Commands
Function Description
Silence alarms Pressing any key will silence the keypad sounder for 10 seconds.
Disarming the system will silence both keypad and external sounders.
Quick Arm If enabled (field ∗21), you can press [#] in place of the system's
security code, plus the desired arming key (Away, Stay, Instant,
Maximum)
Single-Button arming If programmed (*57 Function Key menu mode), lettered keys A-D can
be used for arming, using options 3-AWAY, 4-STAY, 5-NIGHT-STAY,
or 6-Step-Arming
If used, no security code is required to arm the system.
Alarm Memory When the system is disarmed, any zones that were in an alarm
condition during the armed period will be displayed. To clear this
display, simply repeat the disarm sequence (enter the security code
and press the OFF key) again.
Arming Away Enter code + AWAY [2] or simply press appropriate lettered key on
the keypads (see “Single-Button Arming” above). If the “Auto-Stay
Arm” feature is enabled and the entry/exit door is not opened and
closed within the programmed exit delay time, the system will
automatically arm in STAY mode if armed from a wired keypad (non-
RF device). If the door is opened and closed within the exit delay
period, the system arms in AWAY mode.
Arming Stay Enter code + STAY [3] or simply press appropriate key on the keypads
(see “Single-Button Arming” above). See “Arming Away” above for
Auto-Stay arming feature.
Arming Night-Stay Enter code + STAY [3] + STAY [3] or simply press appropriate key on
the keypads (see “Single-Button Arming” above).
Arming Instant Enter code + INSTANT [7].
Arming Maximum Enter code + MAXIMUM [4] or simply press appropriate lettered key
on the keypads (see “Single-Button Arming” above).