Installation manual

– 20 –
– VISTA-12A DEFAULT TABLES –
Field Default Table 1 Default Table 2
20 Installer code 4112 4112
21 Quick arm enable 1 , 1 , 1 0 , 0 , 0
22 RF options 0 , 0 0 , 0
23 Quick {forced} bypassed 0 , 0 , 0 0 , 0 , 0
24 RF house ID 0 , 0 , 0 0 , 0 , 0
25 Arming prevention override 7 , 0 7 , 0
26 Chime by zone 0 0
27 X10 0 0
29 ECP for ACM not used in Australia 0 0
31 Single alarm sounding per zone 1 1
32 fire sounder time out 0 0
33 Siren time out 3 3
34 Exit delay 60 , 60 , 60 60 , 60 , 60
35 Entry delay 1 15 , 15 , 15 15 , 15 , 15
36 Entry delay 2 30 , 30 , 30 30 , 30 , 30
37 Audible Exit warning 0 , 0 , 0 1 , 1 , 1
38 Comfirm. Arming ding 03 , 03 , 03 03 , 03 , 03
39 Power up in previous state 1 1
40 PABX access code As is As is
41 Primary phone number As is As is
42 Secondary phone number As is As is
43 Primary account P1 As is As is
44 Secondary account P1 As is As is
45 Primary account P2 As is As is
46 Secondary account P2 As is As is
47 Phone sys select / Dial attempts 1 , 6 1 , 6
48 Report format prim / second 7 , 7 7 , 7
49 Split dual rep. 0 0
50 Dialler delay {burg} 0 0
51 Primary account P3 As is As is
52 Secondary account P3 As is As is
53 Sescoa / Radionics enabled 0 , 0 0 , 0
54 Dynamic signalling delay 0 0
55 Dynamic signalling priority 0 0
59 Exit error report 0 0
60 Trouble report 1 , 0 1 , 0
61 Bypass report 0 , 0 1 , 0
62 AC loss 1 , 0 1 , 0
63 Low Bat 1 , 0 1 , 0
64 Test report 1 , 0 1 , 0
65 open report 0 , 0 , 0 1 , 1 , 1
66 Arm away / Stay report 00 , 00 , 00 10 , 10 , 10
67 RF trans low batt 1 , 0 1 , 0
68 Cancel report 1 , 0 0 , 0
69 Alarm restores enable 1 1
70 Alarm restores code 1 1
71 Trouble restores 1 , 0 1 , 0
72 Bypass restore 0 , 0 1 , 0
73 AC restore 1 , 0 1 , 0
74 low bat restore 1 , 0 1 , 0
75 RF low batt restore 1 , 0 1 , 0
76 Test restore 1 , 0 1 , 0
77 Summer time start / end month 0 , 0 0 , 0
78 Summer time start / end weekend 0 , 0 0 , 0
84 Auto stay arm 0 0
85 Link zone verification timer 0 , 0 0 , 0
86 Cancel verify keypad display 0 0
87 Misc verify delay times 0 0
88 Exit options 2 2
89 Event log full report 0 , 0 0 , 0
90 Event log enables 15 15
91 Miscellaneous options 0 , 0 0 , 1
92 Telecom Monitor enable 0 , 0 0 , 0
93 No. of report per armed period 6 6
94 Download phone no. As is As is
95 Ring count 0 0