Installation manual

– 15 –
✱
81 ZONE LISTS
List No. Used For… Contains These Zones…
01 General Purpose (GP)
02 General Purpose
03 Chime-by-Zone or GP
04 Linked Zones
05 Night-Stay Zones or GP
06 General Purpose
07 General Purpose
08 Final Contact Set Zones or G P
09 Zones activating pager 1 or G P
10 Zones activating pager 2 or G P
11 General Purpose
12 Exit Zones (*88) or GP
NOTES:
• Any list may include any or all of the system's zone numbers.
• A zone list can be assigned to more than one output relay.
• When creating zone list 4 for linked zones, include only zones assigned to zone types 3, 4, or 5. Do not include zones that have delays
(entry/exit zones, interior w/delay) or 24-hour zones, as these zone types may produce unpredictable operation and may not function as
intended.
Start Zone List Program Mode by pressing ∗
∗∗
∗
81
while in Data Programming mode.
Zone List No.
(00 = Quit) 01
Enter the Zone List Number to program (or 00 to end these entries).
01-12 = zone list number
[∗] to continue
01 Enter Zn Num.
(00 = Quit) 00
Enter each zone number to add to the zone list.
01-06, 09-24, 49-64 = zone numbers followed by [∗] to accept each zone
00 to continue
IMPORTANT: Do not include fire zones in zone lists that are used to STOP device actions.
01 Del Zn List?
0 = No 1 = Yes 0
0 = don’t delete list; current zone list remains saved
1 = delete this zone list; All zones in the zone list will be deleted automatically and the system returns to the
Zone List No. prompt.
[∗] to continue
01 Delete Zone?
0 = No 1 = Yes 0
0 = don’t delete zones; save zone list and return to the Zone List No. prompt.
1 = go to next prompt to delete zones
[∗] to continue
01 Zn to Delete?
(00 = Quit) 00
Enter each zone to be deleted from the list
01-06, 09-24, 49-64 = zones to be deleted from list followed by [∗] to accept each zone
00 when done to return to the Zone List No. prompt