User manual

3LST700 SERIES USER MANUAL • Approved Document No. DFU7001003 Rev 4
LST700 SERIES FIRE ALARM PANEL
SAFETY
The fire alarm panel is safe to operate provided it has been installed in compliance with the
manufacturers instructions and used in accordance with this manual.
Do not operate the fire alarm panel with its enclosure open. There is no need to open
the enclosure except to carry out commissioning, maintenance and remedial work.
This work must only be carried out by competent service personnel who are fully
conversant with the contents of the separate engineering manual for this product and
have the necessary skills for maintaining this equipment.
If the enclosure is damaged in any way, expert advice should be sought regarding its repair.
Regular servicing of the fire alarm system is highly recommended, preferably on a continuous
maintenance contract and by a competent organisation. A full-itemised report of the installation
should be obtained at least annually.
N219
This product has been manufactured in conformance with the requirements of the
Australian Communications Authority and all applicable EU Council Directives.