Specifications

Honeywell Security Combined Installation & Operation Guide

DVR Operation

1.0 DVR Control functions

1.1 DVR Mode

Press the ‘mode’ key, to toggle between Multiplexer and DVR mode.

1.2 DVR Selection

Pressing a number followed by the ‘Fn’ key selects a DVR to control. This also selects the last

camera controlled on that DVR (or the first camera input on that DVR if it has not been selected

previously).

1.3 Menus

Press the ‘F6’ (menu) key to enter the password screen.

Press and hold the ‘Fn’ key and press a number key to enter a number on the password screen.

Press the ‘F5’ (enter) key to enter the password and gain access to the DVR set up menus.

Navigation around these menus is achieved by using the function keys as indicated in the

following table;

Press the ‘F1’, ‘F2’, ‘F3’ or ‘F4’ keys to move around the menu pages.

Press the ‘F5’ enter key to select an option within the menus.

Press the ‘F6’ menu key to exit the current menu. If the user presses ‘F6’ when in the Set up

screen, then the DVR exits the menus and returns to normal operation.

1.4 Screen Control

The following table indicates the keys used for DVR Screen Mode control.

Key Function

F1 up

F2 down

F3 left

F4 right

enter

Key Function

display Display

sequence Sequence

freeze Freeze