Specifications

Honeywell Security Combined Installation & Operation Guide

7.0 Keyboard Functions

7.1 Keyboard Lock

Pressing and holding the ‘LOCK’ key and entering 1212 on the numeric keypad will lock the

keyboard. (LOCKED displayed on the LCD). The same sequence will unlock the keyboard in

full DVR control mode (FULL CTRL displayed on the LCD).

If the keyboard is locked, pressing and holding the ‘lock’ key and entering 3434 on the numeric

keypad will unlock the keyboard in DVR screen control only mode (SCRN CTRL displayed on

LCD). The same sequence will lock the keyboard if in screen control mode, or convert the

keyboard to screen control mode if in full control mode.

7.2 Joystick Auto Calibration

Pressing and holding the ‘LOCK’ key and pressing ‘F6’ will calibrate the joystick centre

position. It is important that the joystick is at its centre détente position when this is performed.