Specifications

Combined Installation & Operation Guide Honeywell Security

Page 1 of 23 © Honeywell 2004 HMKC-001-01

Safety Instructions

WARNING! Read these notes before attempting to operate the unit

Refer all servicing to qualified personnel.

These products contain static electricity sensitive devices. Please take appropriate precautions

when handling.

Handle the unit with care, as improper handling may cause irreparable damage to the precision

or sensitive parts within this unit.

This information and our technical advice - whether verbal, in writing, or by way of trials - is

given in good faith but without warranty and this also applies where proprietary rights of third

parties are involved. Our advice does not release you from your obligation to check its’ validity

and to test our products’ suitability for the intended purpose(s) and use(s). The application, use

and installation of our products either in isolation or in conjunction with other products used,

provided and/or installed by you on the basis of our technical advice are beyond our control and

therefore remain entirely your own responsibility. Honeywell products are sold in accordance

with our General Conditions of Sale and Delivery.

ALL DESIGNS AND SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE

FCC Statement

NOTE: This equipment has been tested and found to comply with the limits for a Class A digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference when the equipment is operated in a

commercial environment. This equipment generates, uses, and can radiate

radio frequency energy and, if not installed and used in accordance with the instruction manual,

may cause harmful interference to radio communications. Operation of this

equipment in a residential area is likely to cause harmful interference in which case the user will

be required to correct the interference at his own expense.

Compliance Information Canada

This Class A digital apparatus complies with Industry Canada Standard ICES-003.

Cet appareil numérique de la classe A est conforme à la norme NMB-003 d'Industrie Canada.

Compliance Information Europe

WARNING: This is a class A product. In a domestic environment this product may cause radio

interference in which case the user may be required to take adequate measures.

Connection to the mains supply

WARNING: The mains supply must be connected by a technically competant person and

according to the current IEE wiring regulations.

CAUTION: To avoid the risk of electric shock you must always totally isolate the mains supply

before making a connection to it.

The PSU must be wired to a double pole fuse spur with 3m separation. The 2A fuse spur must

be located close to the PSU.