Specifications

Combined Installation & Operation Guide Honeywell Security
Page 14 of 23 © Honeywell 2004 HMKC-001-01
4.0 Presets and Tours
4.1 To Define a Preset
For example, to define Preset 1.
Move the selected camera to view the desired preset position, using the joystick, zoom, focus
and iris buttons.
Press and hold the ‘preset’ button.
Press button ‘1’.
Release the ‘preset’ button.
The current position of the camera has now been defined as Preset 1.
Up to 128 presets can be defined, and these are numbered 0 - 127.
4.2 To Seek a Preset
For Example, to seek Preset 1.
Press button ‘1’.
Press the ‘preset’ button.
The camera will now move at the maximum speed to the previously defined Preset 1.
The user may also select presets 1 - 4 by single button presses, using the buttons labelled ‘preset’
‘1’ to ‘4’.
Note: A preset seek will only occur if the preset has previously been defined