Specifications

Honeywell Security Combined Installation & Operation Guide

2.4 Screen Control

The following table indicates the keys used for Multiplexer Screen control.

Press the ‘display’ key to select the next display setting (in the cycle of 4x4, 3x3, 2x2 and PIP)

Press the ‘sequence’ key to put the Multiplexer output into a sequence (the sequence depends

on the current display mode and set up). If the key is pressed again, the sequence stops.

(Displaying the current step in the sequence.)

Press the ‘freeze’ key to freeze the current display. Press the key again to return to the ‘live’

pictures.

Press the ’play’ key to select the VCR input for display. Press the key again to return to the live

picture(s).

Press the ‘search’ key to select the ‘zoom’ mode (see below). Once in zoom mode, press the

‘search’ key again to exit ‘zoom’ mode.

To use the zoom feature (once in zoom mode), press the following keys to move the zoomed

area..

2.5 Spot Monitor Selection

Spot monitors 1 to 4 are selected by first pressing a number key, followed by the ‘monitor’ key.

This will select the spot monitor for control by the keyboard. The spot monitor number will be

displayed no the LCD.

Note: Telemetry commands will be sent to the camera displayed on the MAIN

monitor until a camera is selected on the SPOT monitor.

Pressing ‘0’ followed by the ‘monitor’ key returns the keyboard control back to the main

monitor. (‘MAIN’ will be displayed on the LCD.)

Note: Pressing ‘F6’ (Menu), ‘display’, ‘alarm’, and ‘play’ will also put the

multiplexer back to main monitor control.

Key Function

display Display

sequence Sequence

freeze Freeze

play Toggle VCR Input

search Digital Zoom

Key Function

F1 Up

F2 Down

F3 Left

F4 Right