Operating instructions

5.17.4 Configuration of the keyboard
When the keyboard is being configured, the sub-menu must be set as follows:
DIRECT
LINK
INDIRECT
LINK
Type MULTIPLEXER 4/2 ... 128/16
Protocol SANYO MUX MACRO
Baudrate 1200-19200 1200-38400
Address (*) (**)
Multiplexer ------------------- SANYO MUX
(*) More than one keyboard can be linked to each SANYO multiplexer, the keyboard identification number is
of no importance here. Various multiplexers can be controlled from the same keyboard as long as they are
identified by different unit numbers.
(**) If there is a number of keyboards linked to the cyclic, it means different identification numbers must be
given to each keyboard.
5.17.5 Direct link function test
Select multiplexer no. 1 and switch the various cameras. If there is more than one multiplexer, select the
number that corresponds to the set address (1..99) and switch the various cameras.
5.17.6 Indirect link function test
In the MAIN menu, view the controls for the multiplexer and switch the various cameras. If there is more than
one multiplexer, select the number that corresponds to the set address (1..99) and switch the various cameras.
5.17.7 Dedicated functions
Besides the normal procedure of selecting the video inputs, the SANYO multiplexer has numerous other
functions that are shown in the MAIN menu in the same graphic form as the keys on the local keyboard.
Please refer to the multiplexer manual for further information
Page 88 of 193 MNVADCT_0409