Operating instructions

5.16.4 Configuring the keyboard
When configuring the keyboard, the submenu should be set up as follows:
DIRECT
CONNECTION
INDIRECT
CONNECTION
Type MULTIPLEXER 4/2 ... 128/16
Protocol SANYO DVR MACRO
Baudrate 1200-19200 1200-38400
Address (*) (**)
DVR ------------------- SANYO DVR
(*) It is possible to connect more than one keyboard to each SANYO DVR, the identification number of the
keyboard is of no importance. More than one DVR can be controlled by the same keyboard, as long as they are
identified by different unit numbers.
(**) The presence of more than one keyboard connected to the switcher makes it necessary to define different
identification numbers for each keyboard.
5.16.5 Operational test for direct connection
Select DVR 1 and switch the various cameras. If there is more than one DVR select the number corresponding
to the address setting (1..99) and switch the various cameras.
5.16.6 Operational test for indirect connection
In the MAIN menu, display the DVR controls and switch the various cameras. If there is more than one DVR
select the number corresponding to the address setting (1..99) and switch the various cameras.
5.16.7 Dedicated functions
As well as the normal procedure for selecting input videos, the SANYO DVR is provided with numerous
other functions that are shown in the MAIN menu with the same graphic format as the keys present on the
local keypad.
See the DVR manual for further details.
Page 86 of 193 MNVADCT_0409