Operating instructions

5.16 SANYO DVR
5.16.1 Description
The Sanyo DVR DSR-3016P / DSR-3009P can be used to connect 16 input videos which are digitised and
shown in a composite output image.
WARNING
In the DVR menu regarding communications, set the parameters related to RS485 communication
and the device address (see the corresponding manual)
5.16.2 Direct connection
DCT RJjack1 RJjack2 JAVELIN
RS485A white red RS485A
RS485B yellow green RS485B
The connection is of the RS485 type (one-way) and the maximum distance between keyboard and DVR is
1200 metres.
5.16.3 Configuring the DVR
Configuration can be carried out using the keys on the DVR or via the DCT keyboard if the DVR has already
been configured for RS485 communication.
See the corresponding manual.
To be able to set up the DVR from the DCT keyboard it is necessary to enable setup matrixes/mux (see §
4.2.4.5 - Functions, page34).
Page 85 of 193 MNVADCT_0409