Operating instructions

5.1.1.1 Matrix connected to the video connector
Video control area
CAMERA
Used to select the active camera.
Only accepted cameras can be recalled (see § 4.2.4.1.1 - Cameras with a matrix connection,
pag.27).
MONITOR
Used to select the active monitor.
Only accepted monitors can be recalled (see § 4.2.4.2.1 - Monitor (connection with matrix) ,
pag.30).
UP/DOWN CAMERA
Used to view the preceding or subsequent camera in the matrix sequence.
START AUTOMATIC SEQ UENCE
Activates the automatic matrix sequence for the active monitor.
CLEAR
Used to acknowledge matrix alarms.
5.1.1.2 Multiplexer connected to the video connector
Specific control area for selected multiplexer
Video control area
Page 54 of 193 MNVADCT_0409