Operating instructions

4.6 GRAPH Environment Area
The GRAPH environment consists of a series of screens inside which it is possible to insert a number of keys.
The user is free to choose the appearance (e.g. the graphics, ideograms, trademarks, etc.), the key functions and
the position in the screen.
T hese advantages mean it is possible to create a customised environment within the DCT making it possible
to resolve particular situations during use, to simplify use or limit use to specific activities.
This freedom is expressed as the possibility of managing 30 graphics pages with 40 keys each.
The graphics of these 30 pages are represented by 320x240 pixel format images.
The keys can perform one or more of the most frequently used functions including jumping pages and exiting
the GRAPH environment.
This environment is programmed using the Personal Computer and the reader should refer to the
corresponding manual for details.
The MAIN menu is entered using two keys.
The first is used to enter the main page while the second re-enters the last active page.
The GRAPH environment keeps the characteristics of the “ traditional” working method so that the last line of
the display still acts as the line supplying information about the controls that have been sent and about the
active device (matrix or multiplexer) and the active camera .
GRAPH Environment Area
4.6.1 Exit from “GRAPH Environment Only”
In case of setting the “ GRAPH Environment Only" option (see § 4.2.4.5 - Functions, pag.34) this function
can be deleted setting the dip-switch 1 (see § 2.5 - DIP switch, pag.12) at ON, switch the keyboard off and
then on and move the joystick as shown in the example:
Page 52 of 193 MNVADCT_0409