Operating instructions

4.4.10 MACRO KEYS MENU
The macro keys are special keys that constitute a quick way of carrying out one or more functions by pressing
a single key.
It is possible to set the key position, function and image. Macro keys are programmed using the Personal
Computer and the reader should refer to the corresponding manual for details.
In the example macro functions have been stored in 3 keys.
4.5 Direct control area
T he direct control area occupies a particular part of the MAIN menu screen where the controls that are normally
present in the “ Control menu area” submenus can be shown and kept permanently active.
At the moment it is only possible to enable the Focus menu.
To display the main Focus controls it is necessary to enable the function (see § 4.2.4.6 - Common keys,
pag.35).
When this operating mode is enabled the Focus Menu key in the MAIN menu is disabled.
The controls present are related to the type of active device at that instant. Refer to the specific
controls for the individual devices to obtain further information regarding the eventuality of
particular operating modes and the related settings.
Page 51 of 193 MNVADCT_0409