Operating instructions

4.4.7.1.3 Delete Preset
The Delete Preset menu is used to delete all the Preset positions stored in the controlled device. This type of
function is not present in all devices.
4.4.8 SCAN MENU
The SCAN menu is used to position the controlled device at one of the various positions that are stored using
the PRESET function.
The available number of storage positions depends on the controlled device. To verify the limits of the devices
present in your system, see the sections referring to the connected devices (see ยง 6 - TELEMETRY, pag.95).
4.4.9 WIPER/WASHER MENU
This menu is used to perform the specific function.
Each controlled device has different specifications. Refer to the specific controls for the individual devices to
obtain further information regarding the eventuality of particular operating modes and settings.
Page 50 of 193 MNVADCT_0409