Operating instructions

4.4 Control menu area
AUTOPAN MENU
Used to enter the AUTOPAN function activation menu.
(see § 4.4.1 - AUTOPAN MENU, pag.46)
AUTOFLIP MENU
Used to enter the AUTOFLIP function activation menu.
(see § 4.4.2 - AUTOFLIP MENU, pag.46)
AUX MENU
Used to enter the AUX function activation menu i.e. control of the auxiliary relays present in the
controlled device.
(see § 4.4.2 - AUTOFLIP MENU, pag.46)
FOCUS MENU
Used to enter the control menu for the FOCUS functions.
(see § 4.4.2 - AUTOFLIP MENU, pag.46)
IRIS MENU
Used to enter the control menu for the IRIS functions.
(see § 4.4.5 - IRIS MENU, pag.46)
PATROL MENU
Used to enter the PATROL function control menu.
(see § 4.4.6 - PATROL MENU, pag.46)
PROG MENU
Used to enter the menu to set up the devices controlled by the PRESET functions, DOME set up,
VIDEO set up and any specific function keys for the domes/receivers.
(see § 4.4.7 - PROG MENU, pag.47)
SCAN MENU
Used to recall the numeric keypad for recalling the position that was stored previously using the
PRESET function
(see § 4.4.8 - SCAN MENU, pag.49)
WIPER/WASHER MENU
Used to enter the activation menu for the WIPER and WASHER functions.
(see § 4.4.9 - WIPER/WASHER MENU, pag.49)
MACRO KEYS MENU
Used to enter the activation menu for the programmed control macros.
(see § 4.4.10 - MACRO KEYS MENU, pag.50)
Page 46 of 193 MNVADCT_0409