Operating instructions

4.3 Video/telemetry control area
The appearance of this area will differ according to the chosen configuration and the device being selected (see
§ 5.1.1 - Video: fundamental concepts, pag.52).
T here are four distinct situations:
no device connected to the VIDEO connector
one matrix connected to the VIDEO connector
one multiplexer connected to the VIDEO connector
one matrix connected to the VIDEO connector and a multiplexer connected in cascade to the matrix
4.3.1 No matrix or multiplexer connected
In this case the possible controls are reduced to a minimum and can only be used to change the camera
number, and it is only for telemetry.
4.3.2 One matrix connected
In this case typical matrix controls are activated.
Page 44 of 193 MNVADCT_0409