Operating instructions

4.2.6.2 Buzzer
PARAMETER FUNCTION
Key pressed
Used to set the buzzer volume when the keys are pressed. There are two values: MIN
(minimum)and MAX (maximum).
Joystick
Enables/disables a slight sound every time the joystick is moved
Serial error
Enables/disables the buzzer if there is a serial communication error.
Matrix alarm
Enables/disables the buzzer if there is a matrix alarm.
Power saving
Enables/disables timed power saving for the backlit display
4.2.6.3 Joystick
The action to be carried out will be indicated by the system, by means of the cursor position which will give a
step-by-step indication of the next action to carry out. On entering the menu, the cursor is in position 1.
Follow the procedure, through all the stages:
1 – Release the joystick and press the key
2 – Move the joystick as far to the right as possible, keep it in this position and press the key
3 - Move the joystick as far to the left as possible, keep it in this position and press the key
4 - Move the joystick as far up as possible, keep it in this position and press the key
5 - Move the joystick as far down as possible, keep it in this position and press the key
6 – Turn the zoom knob as far to the left as possible, keep it in this position and press the key
7 - Turn the zoom knob as far to the right as possible, keep it in this position and press the key
WARNING
If a mistake is made during calibration, the operation can be either completely or partially
repeated, taking care to position the cursor at the required calibration stage using the up/down
keys.
Page 39 of 193 MNVADCT_0409