Operating instructions

4.2.4.3.1 Individual Multiplexer cameras
Position the cursor on the number of the camera to be modified. Press the key. The letter corresponding to
the number will change, showing either the letter “ A” (telemetry A), “ B” (telemetry B) or “ o” (disabled).
Exit menu key
Cursor shift key
Cursor shift key
Key for modifying the camera corresponding to the position of the cursor
4.2.4.4 External multiplexer
This menu is used to set up the multiplexers that can be selected by the keyboard (max.16).
The status of the activated multiplexer is shown by the presence of a filled dot.
Key for deactivating all the multiplexers on the page
Key for activating all the multiplexers on the page
Key for activating all the multiplexers on the line selected by the cursor
Key for deactivating all the multiplexers on the line selected by the cursor
Setting multiplexers and cameras beyond the physical limits of the connected devices will be
accepted but will have no effect on the devices themselves.
Page 34 of 193 MNVADCT_0409