Operating instructions

4.2.4.1.4 Cameras with connection to multiplexer
Position the cursor to correspond with the camera to be modified and press the key. The letter
corresponding to the number will change, showing either the letter “ A” (telemetry A), “ B” (telemetry B) or
“ o” (disabled).
Selected multiplexer number
Exit menu key
Cursor shift key
Cursor shift key
Camera modification key
4.2.4.2 Monitor (matrix and multiplexer connected locally)
This menu is used to set up the monitors or multiplexers that can be selected.
4.2.4.2.1 Monitor (connection with matrix)
If a matrix is connected on the VIDEO connector it is possible to set up the accepted values of 100 monitors.
The menu is used to determine the monitors that can be selected by the keyboard.
The keys can be used to simultaneously activate/deactivate all the monitors on the page or a single line, or to
enter the submenu to activate individual monitors. The status of the activated monitor is indicated by the
presence of a filled dot.
Exit menu key
Cursor shift key
Cursor shift key
Individual monitor modification key
Key for deactivating all the monitors on the page
Key for activating all the monitors on the page
Key for activating all the monitors on the line selected by the cursor
Key for deactivating all the monitors on the line selected by the cursor
Setting monitors and cameras beyond the physical limits of the connected devices will be accepted
but will have no effect on the devices themselves.
Page 31 of 193 MNVADCT_0409