Operating instructions

4.2.4.1.3 Cameras with multiplexer connection
The screen will have this appearance only if a multiplexer has been selected in the parameter
COMUNICATIONS-VIDEO_TYPE.
This menu is used to set up the cameras that can be selected by the keyboard.
T he keys can be used to simultaneously activate/deactivate all the cameras on the page, on one line only or to
enter the submenu to activate individual cameras. T he status of the activated camera is indicated by the
presence of the letter A or B to show that the camera is connected to telemetry A or B.
On theVIDEO connector it is possible to set up the accepted values of 10000 cameras.
The keyboard can be used to operate up to 100 multiplexers, each equipped with 100 cameras.
In this case the page graphics appear as follows and a reference followed by a number is used to set up the
cameras for the selected multiplexer.
Exit menu key
Cursor shift key
Cursor shift key
Individual camera modification key
Keys for shifting up/down the multiplexers
.
.
Selected multiplexer number
Key for deactivating all the cameras on the page
Key for activating all the cameras on the page
Key for activating the whole line corresponding to the cursor position
Key for deactivating the whole line corresponding to the cursor position
Telemetry A selection key
Telemetry B selection key
Use the or keys to select the desired telemetry and proceed to activate the cameras using the row or
page keys. To activate/deactivate individual cameras position the cursor on the desired line and press the
key to enter the menu for setting individual cameras.
Setting monitors and cameras beyond the physical limits of the connected devices will be accepted
but will have no effect on the devices themselves.
Page 30 of 193 MNVADCT_0409