Operating instructions

4.2.1.3 How to change the parameters
To change a parameter, select it by positioning the cursor next to it and pressing the key.
T here are three distinct cases:
1. “ Simple” parameters whose modification is linked to pressing the key. In this case, every time the
key is pressed the parameter alternates, showing the possible values.
2. Parameters containing a choice of values. In this case when the key is pressed the text starts to flash and
the up and down keys can be used to choose between the displayed values. The key is used to confirm
the new value. To leave it unchanged press the key.
3. Parameters containing a numerical value. In this case when the key is pressed a numeric keypad appears
and this can be used to change the value.
Example of case 2
Flashing parameter (to be modified)
Key for exiting change mode without modifying the
parameter
Up key
Down key
Key for confirming parameter modification
Example of case 3.
Flashing parameter (being modified)
Key for exiting change mode without modifying the
parameter
DELETE key (deletes the last digit inserted)
ENTER key ( confirms the modified value)
Old value Information regarding accepted values and the type of data required
Page 22 of 193 MNVADCT_0409