Operating instructions

4.2 System data Area
From the MAIN menu, in the system data area, there are two keys that are used to enter the following menus:
SYSTEM SETUP
Used to enter the menu for changing all the keyboard parameters
(see § 4.2.1 - System Setup , pag.19)
SYSTEM INFO
Used to obtain the most important information about how the system is configured and to enter the
“ SERVICE” screen.
(see § 4.2.7 - System Information and service menu, pag.42)
4.2.1 System Setup
To prevent changes to keyboard configuration or limit them to authorised personnel only, access
to the PARAMETERS menu can be restricted by requiring the insertion of a password.
The menu can be used to set up the keyboard operating mode by configuring a series of parameters.
4.2.1.1 Structure of the setup menu
The following is a list of parameter categories that can be set in this menu, and their corresponding icons:
LANGUAGE
COMMUNICATIONS
 VIDEO
 TELEMET RY
 SERIAL TESTS
ACCEPTED VALUES
 CAMERAS
 MONITOR/LOCAL MULTIPLEXER
 CAMERAS EXTERNAL MULT IPLEXER
 EXTERNAL MULTIPLEXER
 FUNCT IONS
 COMMON KEYS
PASSWORD
CONFIGURATIONS
 RESTORE BASE VALUES
 BUZZER
 JOYSTICK
 TOUCH SCREEN CALIBRATION
 TOUCH SCREEN T EST
Page 20 of 193 MNVADCT_0409