Manualshelf

Operating instructions

ManualsBrandsADEMCO ManualsComputer equipmentAHDR4
181182183184185186187188189190
To change the pause length go to the item “ Dwell time” and press the key. Insert the desired value
and confirm with the ENTER key.
To send the configuration, position the cursor on the item “ Send configuration” and press the key.
Exit the menu and start the Standard Patrol.
6.16.8.2 Setup Patrol SA
The Patrol sequence is represented by a series of Preset positions that are performed in succession with a pause
(dwell time) between each position.
The Patrol SA can have a maximum of 40 positions.
T he Patrol change only becomes effective after the changed parameter has been sent..
Procedure for configuring Patrol SA for the Preset positions:
Position the cursor next to the item “ Patrol start”, press the key and insert the desired value.
Position the cursor next to the item “ Patrol End”, press the key and insert the desired value.
To send the configuration, position the cursor next to the item “ Send start/Patrol end”and press the
key.
Procedure for configuring Patrol SA for the Preset positions:
To change the common pause length, go to the item “ Send default pause” and press the key. Insert
the desired value and confirm with the ENTER key.
To change the pause length for an individual position, go to the item “ Send specific pause” and press the
key. Insert the position number and the desired pause length.
Exit the menu and start the Patrol SA.
Page 185 of 193 MNVADCT _0409