Operating instructions

6.16.8 Patrol
From the MAIN menu press the AUTOPAN key to enter the menu for carrying out the specific function.
START STANDARD PATROL
Carries out the corresponding function.
STOP PATROL
Stops the patrol function in progress (Standard and SA).
TOGGLE STANDARD PATROL
Reverses the current status. If in progress the function is stopped and vice versa.
START PATROL SA
Starts the Patrol SA function
TOGGLE PATROL SA
Reverses the current status. If in progress the function is stopped and vice versa.
SETUP STANDARD PATROL
Enters the setup menu for the Standard Patrol function
SETUP PATROL SA
Enters the setup menu for the Patrol SA function
6.16.8.1 Setup standard patrol
The Patrol sequence is represented by a series of Preset positions that are performed in succession with the
same pause (dwell time) for each position.
The Standard Patrol can have a maximum of 14 positions.
T he Patrol change only becomes effective after completing transmission of the configuration to the receiver.
Procedure for setting up the Standard Patrol:
 To enable the position, position the cursor next to the Preset position to be enabled and press the key.
Page 184 of 193 MNVADCT _0409