Operating instructions

 To send the configuration position the cursor on the item “ Send start/end Patrol” and press the
button.
 Position the cursor on the item “ Pause”, press the button and insert the desired pause value.
 Position the cursor on the item “ PAN Speed”, press the button and insert the desired speed value.
 Position the cursor on the item “ TILT Speed”, press the button and insert the desired speed value.
Exit the menu and start Patrol.
6.15.8.2 Setup Random
The RANDOM sequence is represented by a series of Preset positions that are carried out at random.
Procedure for setting up the RANDOM function:
 Position the cursor on the item “ Maximum speed”, press the button and insert the desired value.
 Position the cursor on the item “ Minimum speed”, press the button and insert the desired value.
 Position the cursor on the item “ Maximum pause”, press the button and insert the desired value.
 Position the cursor on the item “ Minimum pause”, press the button and insert the desired value.
Exit the menu and start Random.
6.15.9 Preset, Scan and Home
The PRESET, SCAN and HOME functions are as described in the general explanation with the following
limitations specific of the dome (see § 4.4.7.1 - Preset, pag.47 and see § 4.4.8 - SCAN MENU, pag.49).
Type Minimum position Maximum position Notes
PRESET 1 64
SCAN 1 64
HOME Carry out the SCAN command to
position 1.
6.15.10 Special codes
Go to the special code insertion screen (see § 6.1.5 - Organising the configuration menus , pag.98).
Some parameters can be configured by inserting a special code.
Number Function
SPEED CURVES
Page 179 of 193 MNVADCT _0409