Operating instructions

6.15.4.1 Autopan setup.
Procedure for setting up the Autopan function:
 Position the cursor on the item Autopan Speed, press the Enter button and insert the required speed value
(minimum 1, maximum 255) expressed in minutes. The value of 255 will allow to run the Autopan with
no time limitation.
 Position the cursor on the item Autopan Length, press the Enter button and insert the value corresponding
to the required duration of the Autopan function expressed in minutes.
Exit the menu and start Autopan.
6.15.5 Aux
From the MAIN menu press the AUX key to enter the menu for carrying out the specific function.
SET No. X
Activates relay No. X
RESET No
Deactivates relay No. X
Page 176 of 193 MNVADCT _0409