Operating instructions

 Select the third field, press the ENTER key and use the keypad to set the pause duration when the
position is reached.
 Select “ Send position” and press the ENTER key to send information to the dome.
To add other positions repeat from the first instruction.
Finally press the ESC key to return to the TOUR execution screen.
The inserted data are only saved definitively by the dome on exiting the setup screen.
6.14.10 Preset, Scan and Home
The PRESET, SCAN and HOME functions are as described in the general explanation with the following
limitations specific to the dome (see § 4.4.7.1 - Preset, pag.47 e see § 4.4.8 - SCAN MENU, pag.49).
Type Minimum position Maximum position Notes
PRESET 1 127
SCAN 1 127
HOME Perform the SCAN command to
position 1.
6.14.11 Function keys
From the MAIN menu press the FUNCTION KEYS key to enter the menu for carrying out the specific
controls.
F1
Associated function: “ Alarm mode on”.
F2
Associated function “ Alarm mode off”.
F3
Associated function. “ Mono/Color Toggle”.
F4
Associated function: “ Mono/Color Auto”.
Refer to the dome manual.
Page 174 of 193 MNVADCT _0409