Operating instructions

6.14.9 Patrol
From the MAIN menu press the AUTOPAN key to enter the menu for carrying out the specific function.
START LAST TOUR
Used to carry out the last “PATROL”.
STOP LAST TOUR
Used to stop the “ PATROL” in progress.
START TOUR1..4
Used to carry out the corresponding associated “ PATTERN”. The sequence of positions to be
carried out is set up using the OSD menu.
SETUP TOUR 1..4
Used to enter the setup menu for the specific T OUR.
TOUR4 is used in common with the AUTOPAN function. The first time the START AUTOPAN
key is pressed, any configuration of TOUR4 will be lost and forced to reach the two positions,
PRESET 1 and 2.
6.14.9.1 Setup TOUR
Every time the tour setup menu is entered this is deleted.
TOUR 4 is used for the AUTOPAN function.
The following procedure is valid for all TOURs.
Procedure for adding a position to the selected TOUR :
 Select the first field, press the ENTER key and when the numeric keypad appears set the PRESET
number to reach the dome.
 Select the second field, press the ENTER key and use the keypad to set the speed used to reach the
position.
Page 173 of 193 MNVADCT _0409