Operating instructions

6.14.5 Autopan
From the MAIN menu press the AUTOPAN key to enter the menu for carrying out the specific function.
START AUTOPAN
Carries out the corresponding function.
STOP AUTOPAN
Stops the AUTOPAN function. Autopan stops when one of the two limit switches is reached.
The path to be followed is set up using the dome OSM.
If this function is activated it can only be stopped by the STOP AUTOPAN key. If the joystick is
operated, the dome will continue to move, ignoring the controls until one of the two AUTOPAN
positions is reached.
The setting for the path to be performed with the AUTOPAN function overwrites TOUR 4,
forcing movement to the two positions, preset 1 and 2. Therefore the first time the START
AUTOPAN key is pressed, any configuration of TOUR 4 will be lost.
6.14.6 Aux
From the MAIN menu press the AUX key to enter the menu for carrying out the specific function.
SET No. X
Activates relay No. X
RESET No.
Deactivates relay No. X
Page 171 of 193 MNVADCT _0409