Operating instructions

6.14 VCL Dome
6.14.1 Materials and reference documents
VCL 8” Internal Orbiter Dome
Details of VCLTP Protocol, file ref. CIMICRO8 26.05.99
6.14.2 Connecting the dome hardware
White RS485A Data+
Yellow RS485B Data-
6.14.3 Configuration
The dome is configured by On Screen Menu in those models that allow it.
For all dome configuration operations SETUP TELEMET RY must be enabled.
Connect the dome directly to the keyboard and a monitor to the dome video output following the general
procedure (see § 6.18 - Procedure for setting a dome/receiver in operation, pag.191).
Go to the dome OSM configuration screen. When the configuration key is pressed the “ Camera setup”
command will be sent to the dome (only for those domes that allow it).
6.14.4 Autoflip
From the MAIN menu press the AUTOFLIP key to enter the menu for carrying out the specific function.
START AUTOFLIP
Carries out the corresponding function.
Page 170 of 193 MNVADCT _0409