Operating instructions

6.13.9 Random Group
This function will cause all the positions stored in the corresponding GROUP to be reached at random. The
order of insertion during the setup phase will not be respected.
Preset, Scan and Home
The PRESET, SCAN and HOME functions are as described in the general explanation with the following
limitations specific to the dome (see § 4.4.7.1 - Preset, pag.47 e see § 4.4.8 - SCAN MENU, pag.49).
Type Minimum position Maximum position Notes
PRESET 1 63
SCAN 1 63
HOME Perform the SCAN command to
position 1.
6.13.10 Special codes
Go to the special code insertion screen (see § 6.1.5 - Organising the configuration menus , pag.98).
Some parameters can be configured by inserting a special code.
Number Function
RELAYS
1
AE Mode
2
Priority
21
Flickerless shutter
22
Increase shutter
23
Decrease shutter
124
Iris open
24
Increase iris open
125
Iris close
25
Increase iris close
3
Manual
31
Increase shutter
32
Decrease shutter
33
Increase iris open
133
Iris open
34
Increase iris open
134
Iris close
Page 168 of 193 MNVADCT _0409