Operating instructions

6.13.5 Autopan
From the MAIN menu press the AUTOPAN key to enter the menu for carrying out the specific function.
START AUTOPAN/AUTOTILT
Carries out the corresponding function.
STOP AUTOPAN/AUTOTILT
Stops the corresponding function.
SETUP AUTOPAN/AUTOTILT
Recalls the AUT OPAN/AUT OT ILT setup submenus.
6.13.5.1 Setup Autopan/Autotilt(SWING)
T he following common procedure for each setup describes how to set up the two movements, PAN and
TILT:
 Select the first line and press ENTER, insert the PRESET position number that is to be the starting
position for the function.
 Select the second line and press ENTER. Insert the PRESET position number that is to be the final
position for the function.
 Select the third line and press ENTER. Insert the duration of the pause when one of the two positions is
reached.
 Select the fourth line and press ENTER. Insert the dome movement speed (1-slow, 64-fast).
 Select the item “ Send command” to transmit the completed settings to the dome.
 Press the ESC key to return to the AUTOPAN screen.
The movement starts from the first position and moves either in PAN only or in TILT only to
reach the second position.
Page 164 of 193 MNVADCT _0409