Operating instructions

6.12.8 Preset, Scan and Home
The PRESET, SCAN and HOME functions are as described in the general explanation with the following
limitations specific to the dome (see § 4.4.7.1 - Preset, pag.47 e see § 4.4.8 - SCAN MENU, pag.49).
Type Minimum position Maximum position Notes
PRESET 1 7
SCAN 1 7
HOME Performs the SCAN command to
position 1.
6.12.9 Function keys
From the MAIN menu press the FUNCTION KEYS key to enter the menu for carrying out specific controls.
F1
Associated function: “ V-PHASE +”.
F2
Associated function: “ V-PHASE -”.
Refer to the dome manual.
6.12.10 Special codes
Go to the special code insertion screen (see § 6.1.5 - Organising the configuration menus , pag.98).
Some parameters can be configured by inserting a special code.
Number Function
RELAYS
0
All relays off
1
Relay 1 on
2
Relay 2 on
3
Relay 3 on
4
Relay 4 on
12
Relays 12 on
Page 161 of 193 MNVADCT _0409