Operating instructions

6.10 SANYO Dome
6.10.1 Materials and reference documents
VCC9400P – VCC9300P Dome
Security Serial Protocol (SSP), ver1.14, 2003.08.19
High Speed Security Serial Protocol (SSP), ver1.00, 2003.11.07
6.10.2 Connecting the dome hardware
White
RS485A
A+
Yellow
RS485B
B-
6.10.3 Configuration
The dome is mostly configured by On Screen Menu.
Some parameters can be configured by inserting a special code.
For all dome configuration operations SETUP TELEMET RY must be enabled.
Connect the dome directly to the keyboard and a monitor to the dome video output following the general
procedure (see § 6.18 - Procedure for setting a dome/receiver in operation, pag.191).
Go to the dome OSM configuration screen.
T he screen that appears allows access to dome OSM configuration.
ENTER PROGRAMMING
Used to enter the dome OSM menu.
CONFIRM “ENTER”
Used to enter the submenu and confirm data changes.
Page 148 of 193 MNVADCT _0409