Operating instructions

6.6.12 Special codes
Go to the special code insertion screen (see § 6.1.5 - Organising the configuration menus , pag.98).
Some parameters can be configured by inserting a special code.
Number Function
AUTOPAN
1 Consider the current position as the first limit switch
2 Consider the current position as the second limit switch
3 Show the position of the first limit switch.
4 Show the position of the second limit switch.
AUTOFLIP
5 Enable the AUTOFLIP function.
6 Disable the AUTOFLIP function.
PATROL
21 Start PATROL sequence 1. Equivalent to the key in the PATROL menu.
22 Start PATROL sequence 2. Equivalent to the key in the PATROL menu.
23 Start PATROL sequence 3. Equivalent to the key in the PATROL menu.
ON SCREEN INFORMATION
7 Enable “TITLE AREA ” display
8 Disable “TITLE AREA ” display
9 Enable on screen display of information relating to the camera
10 Enable on screen display of service information
11 Disable all on screen display of information
12 Enable “EVENT DISPLAY MODE”
13 Disable “EVENT DISPLAY MODE”
SET ZOOM SPEED
7X
X=1..4
71 = minimum speed, 74 = maximum speed
SET FOCUS SPEED
8X
X=1..4
81 = minimum speed, 84 = maximum speed
Page 130 of 193 MNVADCT _0409